■Installed 16 bit Analog-to-digital converter and
updated software gives more smoother feeling. Also,
internal electric devices renewed increase speed of interface.
■Indicator function installed
■Direct model select function renewed
■ Quick Set Up Wizard replaced to inside model menu
■ Changeable menu color
■ Improve TELEMETRY LOG remain time display
■ Improve MULTI SETTING GEAR function menu placement
■ Compatible with FH5/FH5U System
■ LP1-2500 battery chargable by USB Type-C
■ Feeling Function can be set 25 segmentation
(M17 can be set from 7 segmentation)
■ Improve Timer function
■ Improve R-Mode Function
■ Improve Down
■ The world first function “MOTION STEERING” can operate steering by tilting M17S.
Firmware: 1.00.03 (fixed minor bug)
How to Update to Firmware 1.00.03
1. Download the firmware Ver. 1.00.03
2. Please make "M17S" folder in root directory. Then, make "update" folder in M17S folder
3. Save unzipped "M17S_firm_1.00.03.prg" and "M17S_lamg_ENG.res" in the "update" folder
(Attached file is already made a folder and you can put it into micro SDHC)
*SDHC card format should be FAT32
*1-2 process by using computer or smartphone
4. Insert the micro SD card to M17S(Please take care of Micro SD direction)
5. Go to SYSTEM menu and choose SD-CARD
6. Click to FIRMWARE and enter [UPDATE]
7. Display "UPDATE OK?" and choose "YES"
8. Start Update and wait until finish
9. When finished update, will display "COMPLETE !"
10. M17S firmware update is completed
In case of updated from 1.01.00, please do more steps.
1. After M17 was restarted, it require update firmware
2. Go to System and choose SD-CARD
3. Select LAUNGUAGE and UPDATE
4. Display "UPDATE OK?" and choose "YES"
5. After finished, will display "COMPLETE!"
6. And choose "YES"
7. After finished Factory reset, M17S update is completed
Do “Factory Reset” in SYSTEM menu
*Error 3 (touch pad calibration error) occupy until finished Factory Reset
*Please save your model data before Factory Reset.
Once did factory reset, all model data will be deleted.
* When inserting Micro SDHC card, please make sure direction of the Micro SD card.
Please insert the Micro SD card slowly and push until making sound of insert.
Then please check surely inserted the Micro SD card in the SD card slot of the transmitter.
Taking off the Micro SD card while updating the Micro SD card is possible not to turn on the transmitter.
*When updated firmware and language files, please charge the transmitter fully before starting update.
*In case of the dropping voltage while updating, firmware update and language file update
cannot be completed and it is possible not to turn on the transmitter.
*If the transmitter cannot be turned on while updating,
please make contact with our distributor in your country.
